Search Results

Measurement of sound intensity techniques has very good application in the source identification of a particular noise character. It has been applied effectively along with modal analysis and FE experimental excitation techniques to find out root cause of a particular noise character in small gasoline engine. A FEM shell model was used to make cylinder block and cylinder head model. FEM simulation was carried out which matched with experimental results. It helped to remove the noise character from engine. The other part of the paper describes the noise reduction of the crankcase cover used for the same motorcycle. It houses crankcase as well as two speed gearbox. The methodology involves very effective combination of experimental harmonic analysis, FE model with the shell element for the 3 piece crankcase cover, and experimental measurements. A particular sequence of this experimental techniques along with computer simulation techniques gives extremely good results.

Small single & two cylinder diesel engines, still have primitive technical design features and extensively used in India and various Asian countries to power small and light motor vehicles viz., three wheelers, light duty four wheelers. These vehicles have become inevitable for the transport for both urban and rural areas. Vehicles with small single & two cylinder engines have high market demand in commercial transport due to restrictions on entry of Heavy Commercial Vehicles (HCV) in congested cities roads. Due to ever rising market demand for higher power and torque requirement along with better fuel economy, vehicle manufacturer are developing high Brake Mean Effective Pressure (BMEP) engines or replacing single cylinder engine by two cylinder engine, similarly two cylinder engine by three cylinder engines. Further, these engines should meet the present and forthcoming stringent emission limits.

Seat system resonant frequencies play an important role in seat design and ride dynamics. So NVH performance of the seats should be assessed from the viewpoint of tactile, acoustic and visual sense. Tactile response is the response of sub-systems, which is induced when the human body contacts steering wheel, footrest or seats. Acoustic response is the behavior of the seat system at the cavity resonance frequencies and visual sense is what we perceive under actual operating conditions. The objective of the present work is to conduct and correlate experimental modal test with FE modal test to identify tactile vibrations. Then the identified main seat modes will be used to set the mode map (seat target) at the stage of full vehicle level. This work will present a practical approach in understanding varied methods and techniques for determining resonant characteristics and for subsequent refinement of FE model.

In the automotive industry, there is a continued need to improve the development process and handle the increasing complexity of the overall vehicle system. One major step in this process is a comprehensive and complementary approach to both simulation and testing. Knowledge of the overall dynamic vehicle behavior is becoming increasingly important for the development of new control concepts such as integrated vehicle dynamics control aiming to improve handling quality and ride comfort. However, with current well-established test systems, only separated and isolated aspects of vehicle dynamics can be evaluated. To address these challenges and further merge the link between simulation and testing, the Institute of Internal Combustion Engines and Automotive Engineering (IVK), University of Stuttgart is introducing a new Handling Roadway (HRW) Test System in cooperation with The Research Institute of Automotive Engineering and Vehicle Engines Stuttgart (FKFS) and MTS Systems Corporation.

Moir� method is useful to measure the shape and the whole-field distributions of displacement and strain of structures. There are many kinds of moir� methods such as geometric moir� method, sampling moir� method, Fourier transform moir� method, moir� interferometry, shadow moir� method and moir� topography. Grating method analyzing directly deformation of a grating without any moir� fringe pattern is considered as an extended technique of moire method. Phase analysis of the moire fringe patterns and the grating patterns provides accurate measurements of shapes or displacement and strain distributions. Some applications of these moir� methods and grating methods to dynamic shape and strain distribution measurements of a rotating tire, sub-millimeter displacement measurements from long distance for landslide prediction, real-time shape measurements with micro-meter order accuracy, etc. are shown. Presenter Yoshiharu Morimoto, Moire Institute Inc.

Virtual testing is a method that simulates lab testing using multi-body dynamic analysis software. The main advantages of this approach include that the design can be evaluated before a prototype is available and virtual testing results can be easily validated by subsequent physical testing. The disadvantage is that accurate specimen models are sometimes hard to obtain since nonlinear components such as tires, bushings, dampers, and engine mounts are hard to model. Therefore, virtual testing accuracy varies significantly. The typical virtual rigs include tire and spindle coupled test rigs for full vehicle tests and multi-axis shaker tables for component tests. Hybrid simulation combines physical and virtual components, inputs and constraints to create a composite simulation system. Hybrid simulation enables the hard to model components to be tested in the lab.

The acoustical performance of a vehicle dash panel system is rated by the noise reduction, which is calculated from the sound transmission and absorption characteristics. A typical dash insulator consists of a steel panel (vehicle body panel), a porous decoupler and heavy layer in the form of sandwich construction. The use of dash panel is to block engine noise from entering into the interior cabin. In the present study the transmission loss of dash panel has been evaluated in reverberation chambers and the sound absorption of dash panel has been determined in impedance tube. This paper deals with improving over all sound transmission loss and shifting of the double wall resonance well below the engine firing frequencies by changing the decoupler materials such as felt and foams of different density and thickness and heavy layer mass per unit area.

Three dimensional finite element analysis of mufflers has been carried out using ANSYS general purpose program. Analysis of simple expansion chamber muffler, extended tube muffler, tapered chamber muffler, offset chamber muffler and flow reversing chamber muffler has been carried out to predict the transmission loss. This three dimensional FEA technique has proved to be successful for the analysis of geometrically complicated mufflers where one dimensional theories can not be used. Parametric analysis of a simple expansion chamber muffler has been carried out to study the effect of expansion ratio, expansion chamber length, number of partitions within a chamber and unequal partitions. Analysis of acoustic cavity of a simple expansion chamber muffler has also been carried out to predict the natural frequencies and acoustic mode shapes.